Archive



Table Tiles

Date Title Authors Lead Text
2008‑12 Part 2: Water Business Trends Examined at Forum Mike Henley Water reuse, desalination, and water scarcity are among drivers impacting the future of the water...
2008‑12 Detection and Quantification of Carboxylic Acid Excursions in High-Purity Water Using an On-Line TOC Analyzer Terry Stange, Ph.D., Zhao Lu, and Emek Blair, Ph.D. In a recent paper by Hanson (1), the author described carboxylic acid breakthrough in several hig...
2008‑12 Summary of Emerging Technology Presentations--Part 1. Mike Henley Technology development is the key to the health of any industry, and water treatment is no differ...
2008‑12 Water Reuse/Recycle in an Electroplating Facility: A Case History Peter S. Cartwright, P.E. large electroplating job shop in the Minneapolis, Minn., area provides contract-plating services ...
2008‑11 Use of Nonvolatile Residue Monitoring in Semi-conductor Water Applications David Blackford et al.
2008‑11 The Use of POU Particle Measurements in High-Purity Water Applications Bill Shade Deionized (DI) water is used extensively in electronics manufacturing. In semiconductor manufact...
2008‑11 Summary of EPA Draft of Drinking Water Contaminant-Candidate List 3 Mike Henley The U.S. Environmental Protection Agency has published a list for public review of contaminants t...
2008‑11 High-Purity Water Use Optimization and Wastewater Issues Mike Henley This article will summarize the Keynote address given at the 2007 ULTRAPURE WATER Semi conference...
2008‑11 Is Cation Conductivity Monitoring Relevant For Todayメs Combined Cycle Power Plant? Luis Carvalho, P.E., Thomas James, and William E. Hunter The PowerSmith Cogeneration facility is a 120-megawatt (MW) combined cycle, cogeneration plant lo...
2008‑11 Use of Nonvolatile Residue Monitoring in Semiconductor Water Applications David Blackford, Ph.D. Nonvolatile residue (NVR) consists of dissolved inorganic material. NVR is primarily silica (bot...
2008‑11 Surface Chemistry Improvement on 316L Stainless Steel Weld Zones Using a Gelled Citric Acid-Based Passivation Agent Daryl L. Roll & Brent J. Ekstrand This article examines a studya to determine the efficacy of a gel-based citric acid chelant passi...
2008‑10 A Way to Optimize Cation/Anion Resin Replacement Frequency Ted Chiu et al. T he traditional approach for determining replacement of cation/anion resins in the pretreatment ...
2008‑10 The Use of Latimer Diagrams to followed the Reduction of Dissolved Oxygen to Water Nicholas M. Martyak, Ph.D. Oxygen is readily soluble in water and can cause a variety of service troubles in water treatment...
2008‑10 Achieving Ultra-Low-Level Measurement of Anions and Cations in Semiconductor High-Purity Water S.M. Rahmat Ullah et al. High-purity water is of utmost importance in the semiconductor industry. Parameters such as sili...

Advertisement

Advertisement